AS3990 AS3991 AS3992芯片技术参数对比表
The AS3992 UHF Gen 2 Reader chip
The AS3992 UHF Gen 2 Reader chip is an integrated analog front-end and provides protocol handling for ISO18000-6b/c 900MHz RFID reader systems. Equipped with multiple built-in programming options, the device is suitable for a wide range of UHF RFID applications.
The AS3992 is pin to pin compatible with the previous AS3990/91 IC’s. It offers improved receive sensitivity to -86dB, fully programmable Rx DRM filters on chip and pre-distortion. Fully scalable, the AS3992 is ideal for longer range and higher power applications.
Offering DRM compliance on chip, combined with improved sensitivity and pre-distortion allows the AS3992 to be the only true world wide shippable IC. The reader configuration is achieved through setting control registers allowing fine tuning of different reader parameters.
The AS3990/91 UHF reader chip
The AS3990/91 UHF reader chip is an integrated analog front-end and data framing system for a 900MHz RFIDreader system. Built-in programming options make it suitable for a wide range of applications in UHF RFID systems. Designed to simplify the design and implementation of an EPC Class1 Gen2 reader, this IC requires only a standard 8-Bit microcontroller with minimal other components.
The AS3990/91 comprises the EPC Class1 Gen 2 protocol (ISO 18000-6c) with digital high speed logic up to the framing level and supports the ISO 18000-6a and ISO 18000-6b Protocol with direct data mode. The Interface to the microcontroller can be either a 4-pin serial data Interface (SDI) or alternatively in case of high data rates are necessary an 8-Bit parallel. The frame management will be done using a 12 Byte FIFO in order to decrease processor workload and ensure a smooth data stream and correct protocol handling. All low level transmission codecs and CRC generation is done internally.
Comparison of austriamicrosystems RFID Reader IC Family
AMS AS3992 |
AMS AS3990/1 |
|
Rx Sensitivity |
-86dBm |
-66 dBm |
Rx sensitivity with +5dBm from antenna reflection |
-73 dBm |
-65 dBm |
Current consumption |
85 mA |
85 mA |
Register count @16 Bit |
|
|
Register count @ 8 Bit |
32 |
32 |
SPI speed |
2 Mbps |
2 Mbps |
Fully compliant with USB Power Supply |
Yes |
Yes |
Internal LDO for supply noise rejection |
YES |
YES |
Link frequency support |
40,80,160,250,320, 640 on chip |
40,80,160,250,320, 640 on chip |
Self Jammer measurement and gain optimization |
YES |
YES |
Input linearity high gain/ low gain setting |
+11,5/ +18dBm |
+11,5/ +18dBm |
Filter setup |
Internal analog Filter – 50 dBc @ co channel |
Internal analog Filter; -6 dBc @ co-channel |
Dynamic filtering |
Yes |
Yes |
LBT Rx Sensitivity |
-86dBm |
-66 dBm |
Carrier Cancellation Technology |
NO |
NO |
Tx Phase Noise at 200Khz offset |
-122dBc/Hz |
-122dBc/Hz |
Transmit pre-distortion |
Yes |
NO |
Advanced receiver architecture: |
Low power radio architecture |
Low power radio architecture |
Coherent IQ demodulation |
Yes |
Yes |
Advance DSP |
No |
No |
Software / Firmware |
C-code based on 8051 |
C-code based on 8051 |
Radio control, Reader configuration and host libraries on Win CE, XP or Linux |
Yes – Sample code based on open platform QT for GUI |
Yes – Sample code based on open platform QT for GUI |
Price (1K) |
$ 41.41 |
AS3990: $ 33.64 |
Download the Data Sheet | AS3992:
|
AS3990: |
For more information, visit austriamicrosystems.com.
UHF RFID专属会员均可下载。
基于ElecKits AS3992 UHF RFID超高频读写模块。
发表评论
要发表评论,您必须先登录。